Do you want to download the stock Firmware ROM flash file of Clone NS2 on your Nexus Clone Android Device? Here, you will get all the process of doing this. This file includes USB Driver, Flash Tool, and How-to Flash manual instructions. You will be able to use this device on Android 4.2.2 Jellybean manufactures this version. You can also use SP Flash tool on this device for Flash Firmware.
Driver: MTK USB Driver
Flash Tool: SP Flash Tool
Android Version: 4.2.2 Jellybean
Download Size: 280 MB
Supported BootLoader HW :
FlashID  CID : 1501004E3958524D42 , Name : N9XRMB , Vendor : 15 , [SAMSUNG]
Device Memory Details ( installed ) :
RAM : [256 MiB]
ROM : eMMC 2 GiB
Manufacturer : [SAMSUNG]
Name : BMRX9
Device Brand : alps
Device Model : hongyu72_wet_lca
Device CPU : MT6572
Device IntName : hongyu72_wet_lca
Device Version : 4.2.2
Device Compile : 6/13/2014 8:14:19 AM
Device Project : NEXUS_NS2_S135MWK_DX04_Z135_V0.4.1887Device
ExtInfo : NEXUS NS2
How to Flash Nexus clone NS2 See Guidelines
System to Flash:
Step 1: At first, download the flash file and then extract it on your computer.
Step 2: Here you need to install MTK USB Driver If you already installed it then you don’t need to do it again. Just skip this process.
Step 3: Now, it is time to open SP Flash Tool and after it load Scatter file form the Firmware.
Step 4: To start the flashing, you need to click on Download or Upgrade button in Flash Tool.
Step 5: Now, you need to connect your device to the computer by using USB cable and make sure that your device is in power off mode.
Step 6: You will get a Download OK message after completing the flashing process. You need to wait for 5-10 minutes to get this message.
· If you face any problem like OS upgrade, dead issue, user security lock or any other problems which are related to software then the Stock Firmware will be the best option to recover.
· Must create a backup file before starting this flashing process otherwise your all data will be removed after finishing this process.