Mi One R3 Stock Firmware Download (Flash File)

    

Do you want to download the stock Firmware ROM flash file of R3 on your Mi Clone Android Device? Here, you will get all the process of doing this. This file includes USB Driver, Flash Tool, and How-to Flash manual instructions. You will be able to use this device on Android 6.0 Marshmallow manufactures this version. You can also use SP Flash tool on this device for Flash Firmware.

 

Chipset: MT6580

Driver: MTK USB Driver

Flash Tool: SP Flash Tool

Android Version: 6.0 Marshmallow

Download Size: 519 MB

MT6580__R3__R3__R3__6.0__ALPS.L1.MP6.V2_YUANDA6580.WEG.L_P2

Device Model   : R3
Device CPU     : MT6580
Device IntName : R3
Device Version : 6.0
Device Compile : 9/4/2017 3:42:19 AM
Device Project : ALPS.L1.MP6.V2_YUANDA6580.WEG.L_P2

How to Flash Mi Clone R3 See Guidelines

System to Flash:

Step 1: At first, download the flash file and then extract it on your computer.

Step 2: Here you need to install MTK USB Driver If you already installed it then you don’t need to do it again. Just skip this process.

Step 3: Now, it is time to open SP Flash Tool and after it load Scatter file form the Firmware.

Step 4: To start the flashing, you need to click on Download or Upgrade button in Flash Tool.

Step 5: Now, you need to connect your device to the computer by using USB cable and make sure that your device is in power off mode.

Step 6: You will get a Download OK message after completing the flashing process. You need to wait for 5-10 minutes to get this message.

Note:

·         If you face any problem like OS upgrade, dead issue, user security lock or any other problems which are related to software then the Stock Firmware will be the best option to recover.

·         Must create a backup file before starting this flashing process otherwise your all data will be removed after finishing this process.

Rating This Post
5/5
%d bloggers like this: